Hello,
Would be grateful if anyone with a later classic mini could help me out!
Both my temperature and fuel gauges aren't working. There is a tiny bit of current going through, as the fuel gauge needle raises very slightly when the tank is full.
After looking at the wiring diagrams I thought the voltage stabiliser might be at fault. But I can't find the fecking thing! My Haynes manual seems to think it should plug in to the back of the instrument console, just under the speedo cable. But there isn't anything there! See picture below:
So I would be very grateful if anyone could tell me where the voltage stabilizer (american spelling, just to help anyone who googles for the problem in the future!) lives on my 96 SPi mini, or if anyone has any other suggestions on what might cause gauge gremlins.