Go to footer

Limited Revs

All your technical, mechanical, electrical, exterior, interior, I.C.E. and even baby seat questions go in here. We've a lot of Mini gurus on the forum who'll be glad to help out with whatever technical probllems your Mini is having, or if you'd like to upgrade/modify yours we'll try to help too.

Moderator: MiniMpi


Limited Revs

Postby antodeco » Wed Aug 05, 2009 7:23 pm

Hi there!
Bit of a strange one happening. The mini seems to be limiting itself at 3500 revs, no matter what gear I am in. Went travelling on a motorway, it peaks out at 3500 so I cant get upto speed too well.

Anyone have any experience of this?

Thanks
User avatar
antodeco
Getting used to the place
 
Posts: 34
Joined: Thu Jan 01, 1970 1:00 am


Postby irishmonkey » Wed Aug 05, 2009 8:43 pm

never with a mini
once in a subaru
one of the ignition coils were gone
the computer was stopping the engine getting damaged
maybe something the same in the mini?

any other issues?
cutting out at junctions, less power etc
User avatar
irishmonkey
Getting used to the place
 
Posts: 26
Joined: Thu Jan 01, 1970 1:00 am


Postby antodeco » Wed Aug 05, 2009 9:00 pm

Hey, no other issues. Power does seem to be dropping a bit. Struggles to get over 100kph. In fact, sometimes power slows down and speed drops in any form of an incline, even though my foot is to the floor.
User avatar
antodeco
Getting used to the place
 
Posts: 34
Joined: Thu Jan 01, 1970 1:00 am


Postby irishmonkey » Wed Aug 05, 2009 9:36 pm

sounds like the subaru
not sure whats wrong with the car but i would imagine the computer is limiting it to save the engine
User avatar
irishmonkey
Getting used to the place
 
Posts: 26
Joined: Thu Jan 01, 1970 1:00 am


Postby antodeco » Wed Aug 05, 2009 9:54 pm

I should state it's an '89 mini!
User avatar
antodeco
Getting used to the place
 
Posts: 34
Joined: Thu Jan 01, 1970 1:00 am


Postby irlmin » Wed Aug 05, 2009 10:24 pm

Check the oil in the carb 'dashpot' and go from there ,
G
Image
User avatar
irlmin
MCOI Founding Member
 
Posts: 6009
Joined: Thu Jan 01, 1970 1:00 am
Location: Peoples Republic of Cork


Postby antodeco » Wed Aug 05, 2009 10:50 pm

Fantastic! I shall have a look and come back!

Thanks for that
User avatar
antodeco
Getting used to the place
 
Posts: 34
Joined: Thu Jan 01, 1970 1:00 am


Postby antodeco » Tue Aug 25, 2009 9:13 am

Finally got around to having a look!

Dashpot seemed fine, but I topped it up anyway. Car does seem a little perkier, but the limited revs is still the same. I was thinking that it could be an intake issue limiting the air, but I decided to try a few things to see if I could narrow it down.

Having the choke slightly out made no difference at all, just wanted to see if it had any bearing.
Took it for a spin and lifted my foot slightly at each 'limit'. When I accelerated again it would get higher up and limit again. I could repeat the same process and each time get higher revs.
User avatar
antodeco
Getting used to the place
 
Posts: 34
Joined: Thu Jan 01, 1970 1:00 am


Return to Board index

Return to Technical Questions and General Mini Help

Who is online

Users browsing this forum: No registered users and 2 guests